First you need to download Foobot application from appropriate platform :
Once downloaded, install it on your smartphone/tablet. Until installation is done, please be connected to the WiFi you want your Foobot be tied to.
Open it and tap on I’ve got a foobot.
Then tap on Setup your Foobot.
Please keep a distance of 5 feet (2m) maximum between Foobot and your WiFi router (this is just for setup process). Power the device using the USB cable and provided USB/sector adaptator. You should see the Foobot lights up blue gradually. When done, tap NEXT.
Gently turn the Foobot upside down (Foobot inscription must be on top of device, as on picture below), then tap NEXT.
Wait for Foobot to blink blue fast. Tap NEXT.
Look at your Foobot, it’s going to blink 5 times. If it’s blue, it means connection was successful. In that case, you can skip next paragraph and go directly to “Did it blink blue?” section.
If Foobot blinked orange, it means connection has failed. Don’t worry, you won’t have to start again all the process.
First, let’s check your Foobot is in correct mode to be setup manually: turn it upside down. It must blink orange very quickly. Once done, you can put it straight (Foobot mention at the bottom).
Click on Ready button, it leads you to your smartphone’s WiFi settings section and select foobot-config network. You might need to refresh your networks list.
To finish stay on desktop iPhone’s view and wait for wireless network icon to show up (iOS devices) or wait for « connected » mention (Android devices). Once it’s displayed, go back in Foobot app.
You can now enter your WiFi’s passphrase and tap NEXT once you’re sure about writing.
/!\ Please note it takes up to 5 secondes for Foobot to react to this new attempt so be careful when looking at « 5 blue blinks » /!\
“Did it blink blue 5 times?” is what you should have on your smartphone. Tap YES if Foobot blinked blue five times.
Then rename Foobot if you want and enter your account's credentials (email and password). You're done!